Senses transitions on inputs and issues user defined serial commands33 user-programmable Command Strings (2 per each input plus startup)Allows multiple instances of user-defined delays within each stringIntuitive OperationWindows™ GUI Software for ProgrammingCompact, Reliable, and Economical
Lossless Ultra HD 4K distribution to (4) UHD or HD outputsSupports PC & HDTV resolutions up to 4K x 2K@30Hz (4:4:4),1080P@120Hz, and 1080P 3D@60HzSupports 30/36/48 bits per pixelFull 3D video support including frame packing up to a 297MHz TMDS clockLED status indicators for power, source signal, and 4 output connectionsAnalog and digital audio extraction via L/R and SPDIF outputs
Supports PC & HDTV resolutions, VGA-to-UXGA and 480p-to-UHDLED indicators for Power, Source Video and Output ConnectionsIncludes brackets for surface mountingExtracts HDMI Audio and outputs it as L/R Analog and TOSLINKSupports LPCM 7.1CH, Dolby TrueHD and DTS-HD Master AudioPlug and play installation with Smart EDID Management
Drives: 2x 20w @ 4Ω or 2x 10w @ 8Ω or 1x 40w @ 8Ω in bridge modeTwo stereo audio inputs, switchable by button, IR remote & RS-232Volume / Bass / Treble controllable by buttons IR remote & RS-232MIC port supports balanced or unbalanced signals3.5mm jack line audio output with controllable volumeMono mix switch for summing left and right channels for driving mono outputs
4K HDMI audio extractor with EDID managementBuilt-in 50 watt audio amp for direct connection to 8 Ohm speakers (25 watts/channel)Audio input for connecting line-level audio inputs (e.g. wireless microphones).Control via, front panel, RS-232, digital pot (rotary encoder), Webpage or TelnetHDMI Ducking (when Line input is detected, HDMI sound volume in the mix is automatically lowered)Primary RS-232 port for device control
Supports 4K UHD resolutionHDCP 2.2 and HDCP 1.4 compliantFast-Switch™ technologyRS232, IP, IR and intuitive front panel controlTwo-line character LCD on front panel for status indicationUses Hall Research Genesis™ Control Command Set (GCCS)
4K HDMI audio extractor with EDID managementBuilt-in 50 watt audio amp for direct connection to 8 Ohm speakers (25 watts/channel)Audio input for connecting line-level inputs (e.g. wireless microphones)Control via, front panel, RS-232, digital pot (rotary encoder)HDMI Ducking (when Line input is detected, HDMI sound volume in the mix is automatically lowered)Primary RS-232 port for device control