König & Meyer

Suitable for microphone arm 23850 and 23860.

This exclusive microphone arm with a 3/8" or 5/8" thread connector in a modern design with a new innovative table clamp for quick and easy positioning of a microphone in the studio or at a multimedia work station. The 6 m long internally guided microphone cable has a 3 pin XLR plug connector. Microphones to max. 1.5 kg are easily held in any position. The clamping width of 10 to 51 mm / ø 15 to ø 51 mm allows the clamp to be attached to a wide variety of surfaces. The stable metal construction with high quality plastic inserts guarantees secure and strong hold. The cleverly shaped clamping parts allow the clamp to be used on smooth surfaces and round-shaped tubes. The microphone arm can also be fixed with the table flange 23855 available as an optional extra.

This exclusive microphone desk arm with 3/8" or 5/8" thread connection in an attractive design and with an innovative table clamp enables the quick and flexible alignment of microphones in studios or multimedia workplaces. Microphones weighing up to 1.5 kg are easily held in any position. With a clamping range of 10 to 51 mm / ø 15 to ø 51 mm, the clamp offers a wide range of mounting options. The sturdy metal frame with high-quality plastic inserts and anti-slip pads ensures secure and powerful clamping. Thanks to the specially shaped clamping surfaces, the clamp can be used on smooth surfaces as well as on round tubes. Optionally, the microphone arm can also be fixed with the additionally available table flange 23855.

Attaches to stands with diameter from 15 to 30 mm. With prismatic clamp connector. Comes complete with adjustable and swiveling boom arm with 3/8" thread.

Steel tube combination for 2 speakers, for tube diameter of 35 mm.

Screw-on wall mount with innovative, patented straddling bearing-anchors. Suitable for speakers with connector diameter of 35/37 mm. This mount provides simple attachment and guaranteed effective clamping of speaker in any position.

Zinc die-cast plate. Attachable to speakers. Diameter 105 mm. Four 6.5 mm holes. May be used with distance rods with M20 bolt.

The swivelling and tiltable wall mount holds your speaker at the angle you want. The mount has 11 different tilt settings moving through 22°. The swivel is adjustable to any angle. The patented expanding mandrel for loud speakers with cabinet interiors of diameter from 35 to 37 mm is adjusted with a key for a non-wobble and low-resonance speaker fit.

Wall mount for speaker boxes with 36 mm flange mounting. This design largely conceals the wall mounting with the speaker box. Very strong and sturdy design, intended for a max. load of 35 kg. The speaker distance from the wall can be individually adjusted in 4 positions.

Solid and stable wall mount with adjustable boom for monitors and speakers up to 15 kg. The boom can be swiveled on both sides up to 54° and tilted continuously up to -17°. The width is 170 mm and the clamping depth ranges from 150 to 220 mm. Self-adhesive rubber pads protect the surface of the box and prevent vibration noise. User-friendly controls allow quick and convenient adjustments, which also remain fixed thanks to additional counter options. The sturdy metal construction is protected by a durable powder coating.

Solid and stable wall mount with adjustable boom for monitors and speakers up to 15 kg. The boom can be swiveled on both sides up to 54° and tilted continuously up to -17°. The width is 200 mm and the clamping depth ranges from 210 to 340 mm. Self-adhesive rubber pads protect the surface of the box and prevent vibration noise. User-friendly controls allow quick and convenient adjustments, which also remain fixed thanks to additional counter options. The sturdy metal construction is protected by a durable powder coating.

Versatile wall mount with sheet for monitors and loudspeakers up to 15 kg. The tray can be swiveled to both sides variably from +3° to -20°. Using 2 clamp screws, that are movable within the breadth of the slit, the box is simply and securely clamped to the holder.

The practical wall and ceiling mount for smaller loudspeakers has been upgraded. A new feature is a cable outlet, which now provides an internal cable guide for hidden installations. Thanks to two special threaded pins and the Allen wrench / hexagon key included in the delivery, the universal joint can be positioned and set exactly. As such the load-bearing capacity increases to 10 kg. The wall distance has been reduced to 160 mm.