König & Meyer

Visa som Rutnät Lista
Sortering

K&M 24105 | Monteringsgaffel for 2x høyttalere

310-00208
Steel tube combination for 2 speakers, for tube diameter of 35 mm.

K&M 24116 | Festeplate, nedfellbart, M20

310-00042
Zinc die-cast plate. Attachable to speakers. Diameter 105 mm. Four 6.5 mm holes. May be used with distance rods with M20 bolt.

K&M 24185 | Veggfeste for høyttaler

310-00207
The practical wall and ceiling mount for smaller loudspeakers has been upgraded. A new feature is a cable outlet, which now provides an internal cable guide for hidden installations. Thanks to two special threaded pins and the Allen wrench / hexagon key included in the delivery, the universal joint can be positioned and set exactly. As such the load-bearing capacity increases to 10 kg. The wall distance has been reduced to 160 mm.

K&M 24195 | Vegg/tak-brakett for høyttalere

310-00039
Wall and ceiling bracket for speakers, adjustable, additional security by wire cable. Wall clearance 271 mm.

K&M 24481 | høyttalerbrakett for vegg, sort

310-00367
Multi-purpose wall mount for speakers with large wall plate for heavy speakers. The mounted speaker can be swiveled to the sides and tilted up to 30°. Easy mounting by convenient hooking in and screw locking.

K&M 259/1 | Mikrofonstativ med galge, ekstra kort, sort

310-00314
Extra low design for bass drums or special use. Die-cast base with folding legs. Comes complete with boom arm.

K&M 260 | Mikrofonstativ uten galge, rund fot, nickel

310-00310
Heavy cast-iron round base, with anti-vibration rubber insert for noise filtration, plastic clutch-style height-adjustment system.

K&M 26085 | Mikrofonstativ med etthåndsgrep

310-00308
With the unique »Soft-Touch« one-hand clutch the height can be adjusted with a quick squeeze to easily raise and lower the mic. Sleek, flat, cast-iron base is very stable and durable. Quality black powder coating is extremely durable.

K&M 26200 | Mikrofonstativ med etthåndsgrep, Elegance

310-00306
The new star in your show! The avant-garde, one-hand microphone stand is setting new standards in design and function. The elegant combination of triangular-shaped sections and the new design of the slender one-hand adjustment mechanism go harmoniously with standard microphone clips and microphones. The integrated knurled screw is impossible to lose and makes tightening and positioning the microphone clip easy. The stand’s simple elegance loses nothing by the addition of König & Meyer’s classic swivel arm. The height of the stand can be adjusted soundlessly, simply and easily using the unique one-hand clutch. The stand is significantly lightweight, but nonetheless stable due to the ingenious round base with an integrated steel plate with an attractive plastic cover. The base’s circumferential rubber profile reduces undesirable vibration and footfall noise even when the stand is tilted far over to the side. Damage to flooring (e.g. parquet) is also prevented.

K&M 26740 | Stativ for studiomonitorer

310-00203
Stable steel stand for monitors with broad completely level round cast-iron base-diameter 450 mm. Rod combination height adjustable using clamping screw and safety splint. For the direct attachment of monitors with 3/8" threaded joint (thread length 12 mm) or to screw in a connector plate 205 x 245 mm for Genelec monitor 1030 or monitors by other manufacturers. Includes 4 thread points and 4 rubber knobs.

K&M 28075 | Stativ for mindre miksebord

310-00304
Heavy duty stand for amplifiers and mixers. Foldable. Spring-loaded locking bolt and locking screw. Felt-lined supporting brackets.

K&M 28130 | stativ for gitarforsterker

310-00303
The amp stand can hold monitors, amps or other equipment to a max. weight of 35 kg without a problem. The angled front legs have significantly improved the stand’s stability and strength. The low centre of gravity ensures even larger amps are securely displayed. The fine adjustment on the supporting leg allows a tilt between 15° and 28°. A microphone can be attached to the telescopic tube using a boom arm with a thread of either 3/8“ or 5/8“. Folds compactly.

K&M 28483 | Rackhylle 19" 3U

310-00032
Easy-to-install shelf for various components, black. 3 space unit.

K&M 293 | Bordfot for svanhals med 3-pin XLR

310-00030
Black cast-iron base with a horizontally mounted XLR-style female socket on upper face. Removable plate, suitable for fitting switches, indicators, controls or connectors, with access to space for additional circuitry. Base is fitted with rear-mounted 3-pole XLR male connector.

K&M 29375 | Bordfot for svanhals med 3-pin XLR, knapp av/på

310-00029
Beautifully designed, compact, zinc die-cast base. 3-pin XLR connections (male/female), completely mounted, crackle-free switching, with phantom powering-pilot light, with switch (gray). Two diodes indicate the operating state (voltage / microphone ON/OFF).

K&M 29376 | Bordfot for svanhals med 3-pin XLR

310-00028
Beautifully designed, compact, zinc die-cast base. 3-pin XLR connections (male/female), completely mounted, without pushbutton or switch.

K&M 29377 | Bordfot for svanhals med 3-pin XLR, knapp push-to-talk

310-00027
Beautifully designed, compact, zinc die-cast base. 3-pin XLR connections (male/female), completely mounted, crackle-free switching, with phantom powering-pilot light, with pushbutton "push-to-talk" (black). Two diodes indicate the operating state (voltage / microphone ON/OFF).

K&M 40900 | Bordrack 8U

310-00026
19" standard 8 unit-rack desk stand. Sturdy U-profile with steel rack rails. Comes with 16 cage nuts and screws.

K&M 42020 | Rackvogn

310-00025
Heavy-duty steel construction. Four casters, two lockable. Angle adjustable to 45° with spring-loaded locking mechanism. 12 space units in top section, 9 in lower section. Cage nuts incl. (32 pcs.). Rack shelves, drawers, blank and ventilation panels are available.

K&M 42040 | Stativ for mikser

310-00302
Sturdy aluminum construction. Folds flat. Adjustable desk width. Non-skid rubber pads.
Filters
Sort
display