JBL

VTX Series G28 Ground-Stack Dual 18" Subwoofer featuring ultra long throw, patented Differential Drive® LF transducers configured in a pseudo-vented-bandpass alignment with inverted woofers (motors out) for improved cooling and reduced power compression. Large area, laminar-flow, low-turbulence central port. Includes: (2x) 2269H dual 4-inch voice coil, dual magnet 18" transducers; front NL4 connector for use when G28 enclosures are configured in rear-firing mode to create reverse-cardioid subwoofer arrays. Rectangular form factor for convenient ground stacking. Transportation and handling accessories supplied separately. Weight 92.5 kg (204 lb). Black

VTX Series S25 Suspendable Dual 15" Subwoofer. Companion subwoofer for VTX V20 featuring ultra long throw, patented Differential Drive® LF transducers configured in a front-loaded alignment with large area, laminar-flow, low-turbulence central ports. Includes: (2x) 2267H dual 4-inch voice coil, dual magnet 15" transducers; captive suspension hardware; front NL4 connector for use when S25 enclosures are configured in rear-firing mode to create reverse-cardioid subwoofer arrays. Rectangular form factor facilitates cardioid configurations (ground stacked or suspended). Transportation and handling accessories supplied separately. Weight 65 kg (143 lb). Black.

VTX S25 Vertical Transporter for transportation of up to three VTX S25 enclosures in a vertical column in either front-firing or cardioid mode. Includes: dolley board with four tour grade casters (2 locking casters per dolley board). Reinforced protective cover (VTX-S25-VT-CVR) supplied separately.

VTX S25 Vertical Transporter Cover for use with VTX-S25-VT. Modular, reconfigurable design allows for protection of two or three VTX S25 enclosures in either front-firing or cardioid mode.

VTX Series S28 Suspendable Dual 18” Subwoofer featuring ultra long throw, patented Differential Drive® VLF transducers configured in a front-loaded alignment with large area, laminar-flow, low-turbulence central port. Includes: (2x) 2269H dual 4-inch voice coil, dual magnet 18” transducers; captive suspension hardware; front NL4 connector for use when S28 enclosures are configured in rear-firing mode to create reverse-cardioid subwoofer arrays. Trapezoidal form factor facilitates tightly-packed cardioid configurations (ground stacked or suspended). Transportation and handling accessories supplied separately. Weight 81.6 kg (180 lb). Black.

VTX S28 Accessory Cover Caster-Board for transportation and protection of one S28 enclosure. Includes: padded, reinforced protective cover with handle cutouts and rear panel access flap; dolly wheel-board with rugged, tour grade casters and rotating cam mechanism for secure attachment.

VTX S28 Vertical Transporter for transportation of up to three VTX S28 enclosures in a vertical column in either front-firing or cardioid mode. Includes: dolley board with four tour grade casters (2 locking casters per dolley board). Reinforced protective cover (VTX-S28-VT-CVR) supplied separately.

VTX V20 ARRAY FRAME for suspending or ground stacking VTX V20 or VTX S25 enclosures. Includes leveling screw jacks; optional extension bar available. Weight 46.3 kg (102 lb). Steel, black.

VTX V20 ARRAY FRAME EXTENSION BAR for use with VTX-V20-AF, front- or rear-mounted. Single (central) or dual (side-mounted) extension bars can be used for added stability and tilt adjustment to facilitate ground stacked systems. Weight 22.7 kg (50 lb). Steel, black.

Columbus McKinnon (CM) Series 653 ¾ ton manual lever hoist

VTX V25 ARRAY FRAME - TOURING for suspending or ground stacking VTX V25 or VTX S28 enclosures. Includes leveling screw jacks; optional extension bar available. Weight 80.3 kg (176.9 lb). Steel, black.

Extension Bar accessory used in conjunction with the VTX-V25-AF array frame for deploying VTX V25 series systems in either compression or tension mode. Five extension bar attachment options provide variable pick point separation (2-point suspension) and added flexibility for single point suspension. The extension bar can be front- or rear-mounted for increased array up-tilt or down-tilt, respectively. When rear-mounted, provides an attachment point for compression suspension. A single extension bar can be installed in the array frame central tube, or alternatively, a pair of extension bars can be front or rear-mounted in left/right array frame tubes. Single or dual extension bars can also be front- or rear-mounted in ground stack applications for extra stability and a wider range of array tilt angle options. Dual extension bars can also be front-and rear-mounted for compression suspension when increased array up-tilt is required.

WAGO 231 female cable connector 5pin. Including strain relief housing