DSP-AEC-1010-DA | Audio DSP With AEC, 4-In/4-Out Analog, 4-In/4-Out Dante and 2x2 USB from TiGHT AV

The DSP-AEC-1010-DA is an audio signal processing unit with analog and Dante interface, as well as a USB for computer audio. The unit is configured and controlled from a Windows application that presents an easy to use GUI. Powerful processing with eq, dynamics, mixing and matrix combined with advanced acoustic echo cancellation (AEC) makes this unit suitable for a wide range of use cases. A single network cable connected to a PoE network switch allows for both power, control and Dante audio. Analog audio inputs supports both microphone and line level sources. Phantom power is selectable individually for each channel. USB connection to host computer works as a sound card for easy computer audio connectivity for both playback and recording
Loading...
Tillverkare: TiGHT AV
Artikelnr: 670-00020
Tillverkarens artikelnr: DSP-AEC-1010-DA
Läs mer hos vår leverantör:
The DSP-AEC-1010-DA is an audio signal processing unit with analog and Dante interface, as well as a USB for computer audio. The unit is configured and controlled from a Windows application that presents an easy to use GUI.

Powerful processing with eq, dynamics, mixing and matrix combined with advanced acoustic echo cancellation (AEC) makes this unit suitable for a wide range of use cases.
A single network cable connected to a PoE network switch allows for both power, control and Dante audio.

Analog audio inputs supports both microphone and line level sources. Phantom power is selectable individually for each channel. USB connection to host computer works as a sound card for easy computer audio connectivity for both playback and recording.


KEY FEATURES
• 4 analog inputs and outputs
• 4 Dante inputs and outputs
• USB for computer audio playback and recording
• Powerful DSP processing with matrix and mixer
• Advanced AEC (Acoustic Echo Cancellation)
• External control from custom software or 3rd party control systems
• External control from configurable PoE wall panel
• Open API for external control via ethernet or RS-232/485


Click here to download SW
The DSP-AEC-1010-DA is an audio signal processing unit with analog and Dante interface, as well as a USB for computer audio. The unit is configured and controlled from a Windows application that presents an easy to use GUI.

Powerful processing with eq, dynamics, mixing and matrix combined with advanced acoustic echo cancellation (AEC) makes this unit suitable for a wide range of use cases.
A single network cable connected to a PoE network switch allows for both power, control and Dante audio.

Analog audio inputs supports both microphone and line level sources. Phantom power is selectable individually for each channel. USB connection to host computer works as a sound card for easy computer audio connectivity for both playback and recording.


KEY FEATURES
• 4 analog inputs and outputs
• 4 Dante inputs and outputs
• USB for computer audio playback and recording
• Powerful DSP processing with matrix and mixer
• Advanced AEC (Acoustic Echo Cancellation)
• External control from custom software or 3rd party control systems
• External control from configurable PoE wall panel
• Open API for external control via ethernet or RS-232/485


Click here to download SW
*
*
*
Kunder som köpte denna köpte också

Control 29AV-1 WH | vit 2-vägs monitor, 8-bas, 90x90 horn

801-00121
High Output Indoor/Outdoor Monitor Speaker. 150W Pink Noise, 300W Program Power, 92 dB Sensitivity. 70V/100V Taps at 110W, 55W, & 28W (and 14W at 70V) plus 8 ohm Thru. 110° x 80° Coverage with Rotatable Horn. Built-In Invisiball® Installation System plus Ten M6 Suspension Points. Kevlar Cone Woofer and Titanium Compression Driver. Includes Sonicguard(tm) Overload Protection. Includes MTC-PC2 Sealed-Entrance Panel Cover, in White. (Priced and Packed as Each).

PRX412M | 2-vägs topp/monitor, 12"/1.5", 90X50

800-02000
12" two-way stage monitor or front of house passive speaker system; 1200 Watt peak power handling , 126dB Maximum SPL , 8 ohms. DuraFlex™-covered 18mm plywood enclosure, 16 gauge cloth-backed steel grille, dual 36 mm pole sockets, non-skid rubber feet. 12 M10 suspension points. Net Weight 17.5kg (38 lbs.)

ACP-ENC-OLED | DSP Control Panel With Encoder and OLED Display from TiGHT AV

670-00030
DSP control panel with encoder and OLED display. Programmable control panel with encoder and OLED display, for use with the 10x10 DSP Dante

LCT 81C/TM | Högtalare för systemtak, 70V/100V/8 Ohm

801-00040
JBL-LCT 81C/TM is a full-range ceiling speaker designed to lay into a 600 x 600 mm metric suspended grid ceiling, with no cutting of ceiling tiles required, making for an easy and cost- effective installation with a minimum of mess. The low profile depth of only 100 mm (4 in) allows the speaker to fit in locations where deeper loudspeakers do not. This loudspeaker is designed to provide excellent performance for paging and light-to-medium music in a wide variety of applications, including education classrooms, business music systems, retail stores, music/paging systems, airports, reception/waiting rooms, lounges, courtrooms, meeting rooms, and more. The very high sensitivity of 96 dB provides maximum sound level, even at low tap settings. JBL-LCT 81C/TM contains a 200 mm (8 in) dual-cone driver with a very high 96 dB sensitivity. The driver features a 25 mm (1 in) diameter voice coil with a Kapton coil-former and high- temperature wire for better power dissipation and long-term reliability. The speaker's built-in 10 Watt transformer provides versatility by allowing use on 100V or 70V distributed loudspeaker lines, as well as at 8 ohms (low impedance) for driving directly from a low- impedance power amplifier. Adjusting is convenient via a rotary switch on the side of the rear enclosure.

EON715 | Aktiv, 15"+ 1", 1300W, blåtand, svart

800-00032
15-inch Powered PA Speaker with Bluetooth

AU-X2O-DA | Dante-adapter, 2 x XLR Out from TiGHT AV

670-00040
Plug-and-Play PoE Dante Interface | AU-X2O-DA from TiGHT AV outputs two channels of analog line level audio from your Dante network. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip. Featuring two male XLR standard connectors, the AU-X2O-DA is a simple and cost-efficient solution to connect analog equipment to a Dante network. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector. KEY FEATURES: •Plug and Play •2 x line outputs on standard XLR male connectors •Dante and AES67 support -24-bit audio support •Supports 802.3af PoE •Dante Controller and Dante Domain Manager compatible
Filters
Sort
display